Bahco BCL33AP1, Operating Instructions Manual

Page: 7 / 133

•
7
•
5. SPECIFIC SAFETY RULES AND/OR SYMBOLS
Recycle Do not throw in Garbage
&ODVV,,7RRO ,QGRRUXVHRQO\
Do not incinerate and put the battery
RQ¿UH
Do not recharge if the battery is broken
or damaged
Do not wet Risk of electric shock
a.c.
Alternating Current
d.c.
Direct Current
W
Watts
V
Volts
Hz
+HUW]
/min
Revolutions or Reciprocations per Minute
kg
Kilograms
mm
Millimeter
kg-cm
Kilograms - Centimeter
ft-lb
Foot-Pound
6. FEATURE
2
4
3
1
1. Variable Speed Dial
2. PAD
3. Main Switch
4. Side Handle
7. OPERATING INSTRUCTIONS
Removing or Installing Battery Pack
1. Always switch off the machine before insertion or removal of the
battery pack.
2. To remove the battery pack, push the button on the battery pack
and pull the tool unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery
pack sliding groove and push the tool unit into place.
The tool unit can be slide into battery pack in two directions.
4. Do not force the battery pack in sliding it into tool unit. If the battery
pack does not slide in easily, it is not being inserted correctly.
Charging the Battery Pack
1. Connect the plug to the charger before charging.
2. Plug the fast charger into the power source.
3. Slide the battery pack into the charger as the arrow direction shown
on the charger.
4. Push the battery pack into place and make sure the red light on the
charger is “ON”. The battery pack is now starting the charging cycle.
$IWHU¿QLVKWKHFKDUJLQJF\FOHWKHOLJKWZLOOWXUQLQWRJUHHQ7KH
battery pack is now ready for use.