Bahco BBCE24-10, Manual

Page: 11 / 150

• 11 •
16. DISPOSAL INFORMATION
Do not dispose of this product with other household waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, and
to promote the sustainable reuse of material resources, recycle it responsibly. To
discard your used device, please use the return and collection systems or contact
the retailer where the product was purchased, for environmentally-safe recycling.
17. TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE REASON/SOLUTION
Battery connectors do not spark
when touched together.
The charger is equipped with an auto-
start feature. It will not supply current to
the battery connectors until a battery is
properly connected. The connectors will
not spark if touched together.
No problem; this is a normal condition.
The charger will not turn on
when properly connected.
AC outlet is dead.
Poor electrical connection.
Check for open fuse or circuit breaker
supplying AC outlet.
Check power cord and extension cord
for loose fitting plug.
I cannot select a language on
the display.
Press the button for 5 seconds to select
a language:
(EN-FR-ES-DE-SE-ITA).
No problem; this is normal.
Green LED is lit and the display
shows ANALYZING BATTERY .
The charger needs to check the
condition of the battery.
The green LED will be lit when the
charger is checking the condition of the
battery. This is normal.
Green LED is flashing and
the display shows CHARGE
ABORTED-BAD BATTERY .
The battery is too large for the charger.
The battery voltage is still below 20V
after 2 hours of charging.
You need a charger with a higher amp
rate.
Have the battery checked.
The display shows CONNECT
CLAMPS .
The clamps are not making a good
connection.
The fuse is bad.
Check for poor connection at battery
and frame.
Replace the in-line fuse for the ring
connector.
18. SPECIFICATIONS
Input .................................................................................................. 230V AC~50Hz, 3.2A
Output ............................................................................................................... 24V 10A
Ingress Protection rating ..............................................................................................IP20
19. REPLACEMENT PARTS
Battery clamps (quick-connect).............................................................................BBCEC2
Ring connectors (quick-connect) ..........................................................................BBCER2