7
www.stairslight.com
When designing the connections between the controller and LED points, the appropriate type
of wiring should be selected, according to the current flowing in the circuit. The (+) supply line for
12V LED strips or LED lights should have a much larger cross-section than the cables between the
controller and individual LED strips.
Installation must be carried out very carefully and securely to avoid loosening of wires or short
circuits between them. LED strip wires should be soldered. We do not recommend using special
sockets and plugs, because after a while, due to the movements of the stairs, they become loose
and may lose contact.
Ceiling lighting
