Page 9
Input Signal Indicators
A set of three pairs of LEDs indicate signal present, +4dBu and input clip for each channel. The signal
present LEDs operate at approximately –40 dBu, giving a useful indication of even relatively low input signal
levels. The +4 dBu LEDs are intended to show nominal operating level and can also be useful for setting
system gain structure. Clip LEDs warn the user of input overload and operate at +19 dBu.
Preset Store and Recall
These controls provide access to the 45 presets stored within the device. Pressing the store button allows
the user to name a preset and choose which memory location it will be held in. Pressing store button again
completes the process. The Recall function operates in a similar way, pressing the recall button allows the
user to select which preset they require, pressing the button for a second time recalls the new DSP settings.
Note that presets cannot be stored or recalled when Secure mode is activated.
Channel Select Buttons
The currently selected channel is displayed on the top left hand corner of the LCD. Pressing the channel but-
tons scrolls through the available input and output channels and finally through the utility functions and back
to the default screen. If operating a stereo linked preset, the channel name will indicate the channel pairing.
For example ‘A+B’ means both input A and B parameters. The name of the output will be shown briefly at
the top of the display when stepping onto an output.
Edit Select Buttons
The currently selected edit parameter page is displayed on the bottom left corner of the LCD. Pressing the
edit select buttons moves through the available parameters for the current input or output.
Front Panel
2x 24 character
LCD
Input Signal
Indicators
Store and
Recall buttons
Channel Select
buttons
Parameter Edit
Encoders
Output Mute
buttons
Limiter
Indicators
Edit Parameter
Select buttons
u
KS26
