![background image](http://html1.mh-extra.com/html/bafang/ub40/ub40_consumers-manual_3439948011.webp)
11
USER SETTING
CONSUMER MANUAL –
DP C18.CAN
7.2.7 “SOC View” --- set indication mode
for battery capacity
Briefly press (<0.5S)
or to select “SOC
View”, and then briefly press (<0.5S)
to
enter into the interface. Select the display
mode for output as “Percent”/ “Voltage”.
And then briefly press (<0.5S)
to save
and exit back to “SOC View” interface, then
briefly press (<0.5S)
for two times to exit
or you can also select “BACK”
→
“EXIT” to
exit back to the main interface.
7.2.8 “TRIP Reset” --- set reset function
for single-trip
Briefly press (<0.5S)
or to select “TRIP
Reset”, and then briefly press (<0.5S)
to enter into the interface. Select “NO”
and “YES”, be reset date includes maxi-
mum speed (MAXS), average speed (AVG),
single-trip distance (TRIP). And then briefly
press (<0.5S)
to save and exit back to
“TRIP Reset” interface, then briefly press
(<0.5S)
for two times to exit or you can
also select “BACK”
→
“EXIT” to exit back to
the main interface.
7.2.9 “AL Sensitivity” --- set light
sensitivity
Briefly press (<0.5S)
or to select “AL
Sensitivity”, and then briefly press (<0.5S)
to enter into the interface. Select the level of
the light sensitivity as“0”/“1”/“2”/“3”/“4”/“5
”/“OFF”. OFF means close the function. And
then briefly press (<0.5S)
to save and exit
back to “AL Sensitivity” interface, then briefly
press (<0.5S)
for two times to exit or
you can also select “BACK”
→
“EXIT” to exit
back to the main interface.
7.2.10 “Password” --- set access password
Briefly press (<0.5S)
or to select
“Password”, and then briefly press (<0.5S)
to enter into the interface. Select
“BACK” or “Start PassWord” and then briefly
press (<0.5S)
again to confirm. After
that briefly press (<0.5S)
or to select
“OFF”/“ON”. The below is the specific way
of switching.
Starting password:
In “Start PassWord” interface and select
“ON”. Briefly press (<0.5S)
to confirm ,
and then can input password in this inter-
face. At this moment, briefly press (<0.5S)
or to select numbers“0-9”, and then
briefly press (<0.5S)
to confirm and to
input next number. After input, need to
repeat the above step to input password
again. If the both password is same, the
system will prompt, it is successful to set
password, otherwise it need to repeat the
first step to input the new password and
then re-confirm.
FiSHAW 202
3