12
DISPLAY MANUAL
DP C18.UART
⑶
“Auto Off”--- set automatic Off time
Briefly press (
<
0.5S)
or to select
“Auto Off”, and then briefly press (<0.5S)
. This moment, briefly press (<0.5S)
or to switch automatic Off time as
“OFF”/“9”/“8”/“7”/“6”/“5”/ “4”/“3”/“2”/“1”.
The unit is minute. After selection, briefly
press (<0.5S)
to save the set and exit
back to “Auto Off”. Briefly press
for twe
times (interval time is less than0.5S) to exit
back to main interface or select “BACK”
→
“EXIT” to exit back to main interface.
⑷
“Default Mode”--- set riding mode for
starting up
Briefly press (<0.5S)
or to select “De-
fault Mode”, and then briefly press (<0.5S)
. This moment, briefly press (<0.5S)
or
to switch default riding mode for starting
up as “ECO”/“Sport”. After confirmation,
briefly press (<0.5S)
again to save the
set and exit back to“Default Mode”. And
then briefly press
for two times (interval
time is less than0.5S) to exit back to main
interface, or select“BACK”
→
“EXIT”to exit
the main menu.
⑸
“Power View”--- set output display mode
Briefly press (<0.5S)
or to select
“Power View”, and then briefly press (<0.5S)
. This moment, briefly press (<0.5S)
or to switch the output display mode as
“Power”/“Current”. After confirmation,
briefly press (<0.5S)
again to save the set
and exit back to “Power View”. Briefly press
for two times (interval time is less than
0.5S) to exit back to the main interface, or
select “BACK”
→
“EXIT” to exit back the
main interface
.
⑹
“SOC View” --- set display mode for
battery level
Briefly press (
<
0.5S)
or to selcet “SOC
View”, and then briefly press (<0.5S)
.
This moment, briefly press (<0.5S)
or
to switch display mode for output as
“Percent”/“Voltage”. After confirmation,
briefly press (<0.5S)
to save the set and
exit back to “SOC View”. Briefly press
for two times (interval time is less than 0.5S)
to exit back to the main interface, or select
“BACK”
→
“EXIT” to exit back to the main
menu.