BAFANG DP C01.RS2 32.7, User Manual

Page: 48 / 53

48
the “mode” key for shorter than 0.3 seconds to set the other communication items in sequence. After all
these settings, double press the “mode” key for shorter than 0.3 seconds to exit the interface of battery
communication settings.

The following information will not be displayed unless communication has been established
between the battery and the controller. If there is no communication between the battery and
the controller, the display will only show "- - - -" when entering the battery communication
interface.
Information to be displayed on the interface of battery communication:
Information Displayed in the
Speed Field
Definition
b01 current temperature
b02 maximum temperature
b03 lowest temperature
b04 total voltage
b05 current
b06 average current
b07 remaining capacity
b08 full capacity
b09 relative state of charge
b10 absolute state of charge
b11 charge/discharge cycles
b12
the longest time that the battery was left uncharged
after a charge in the past
b13
the time that the battery has been left uncharged
since last charge
d01 1st cell voltage
d02 2nd cell voltage