21
Figure 1
Figure 2
Make sure that the cover's bottom is fastened onto the drive unit's bottom
with screws after the cover's upper part buckles into the slot (see Figure 1). If
brake cables and gear cables are to be arranged under the drive unit’s
bottom, the cable gatherers can be fastened onto the cover's bottom and the
drive unit’s bottom (see Figure 2) to limit the cables into the channel. .
Tightening torque
：
1N.m
C. screw holes on the drive
unit’s cover
D. end cover on the right
E. cable gatherers
1401150100005
F.
cross
head
screw
assembly M3*8
(1401020000127)
Tool:
Summary of Contents for DP C01.RS2 32.7
Page 9: ...9...
Page 50: ...50 Fault Alert Interface...
