53
5.5
Parameter Setting
Items to be Set:
Setting Preparation
When the display is active, pressing the “mode” key two times (the interval
between the two pressing actions should be shorter than 0.3 seconds), the system will
enter the MENU parameter setting state, in which the display parameters can be set.
Press the “mode” key two times (the interval between the two pressing actions
should be shorter than 0.3 seconds) again to exit the parameter setting state.
Enter the Parameter Setting Interface
Data reset
km/mile
Light sensitivity
Backlight
brightness
Automatic off time
Maintenance
warning settings
Input of the
password
Wheel
diameter
selection
Change of
speed limit
