13
Battery/ Battery Cradle Installation
This kit comes complete with a custom built
battery cradle that interfaces with the drink
bottle holder holes in the downtube of your
frame and allows you to securely lock the
battery into place.
To start, make sure you have separated the
battery from its cradle as shown in photo 1.
Next, make sure you have removed the two
bolts where the drink bottle holder goes,
shown in photo 2.
Finally, align the slots in the cradle with
the holes in the frame. Insert the two bolts
through the cradle into the frame as shown
in photo 3. The cradle can now be slid up
and down the down tube to find the most
optimum position. Once this is done, tighten
the two bolts and slot the battery in it’s
cradle. The completed battery and cradle
installation can be seen in photo 4.
Turn the key in the battery to lock it in place.
