Av. de Velázquez s/n
(Cruce Aeropuerto) 29004 Málaga
www.baezaonline.com
Atención al cliente
951 91 91 21
TROUBLESHOOTING
PROBLEM
POSITION
SOLUTION
WATER LEAKS
Filter housing
The o-ring is dirty, misplace or pinched.
Connection fitting
tubes;
Part of the thread:
Teflon missing.
Connection
fitting
tubes;
Part of the tube:
Badly installed bicono.
Badly threaded tube fittings.
Badly cut or pinched tube.
Dispensing tap:
Regular handle height.
Remove the nozzle and the button.
In case of wear of the tap replace it.
SCANT
PRODUCTION
When the tap is
opened, the
supply
immediately
ceases, leaving a
slight continuous
drip.
The collector tank is
full:
Lack of air in the collector tank. Restock
(between 0.3 kg and 0.5 kg).
The tank tap is closed.
Punctured collector tank membrane.
Water comes out of the air inlet valve.
Change collector tank.
The collector tank is
empty:
You must wait between 3 and 5 hours for
the collector tank to be full.
The collector tank inlet valve is closed.
Excessive amount of air in the collector
tank. Check the pressure (between 0.3 kg
and 0.5 kg).
SCANT
PRODUCTION
The equipment is
continuously
rejecting water in
the drain.
The collector tank does
not fill up:
Dirty filters. Replace.
The inlet pressure is less than 3 kg/cm2.
Install a pump.
Membrane in poor condition. Replace.
The flushing valve is open.
The collector tank is
overflowing:
SHUTT OFF valve is dirty, has a torn
membrane or does not work. Replace.
The non return elbow located in the
membrane container does not work.
Replace.
Possible water leakage.
THE EQUIPMENT
DOESN’T
PRODUCE
The collector tank is
empty:
Clogged filters.
Clogged, broken or closed inlet tap of the
equipment.
Blocked membrane.
WATER FLAVOUR
CHANGES
The collector tank is
empty:
Change of mineralization in water due
to saturation or clogging of filters or
membrane (replace the membrane).
WRONG WATER
ASPECT
The water has a milky
appearance on the
surface
Accumulated airbags in the general
network of the accumulation or in the
osmosis equipment.
