Av. de Velázquez s/n
(Cruce Aeropuerto) 29004 Málaga
www.baezaonline.com
Atención al cliente
951 91 91 21
9. INSTALLATION
This company recommends that professionals install the machine for you,
because you must use drills and other power tools in the installation process. If
you’re installing it yourself, please refer to the following steps and diagrams:
1. Pre-installation preparations:
1. Confirm the location the water purifier will be installed (when installing, it
should depend on the actual circumstances).
2. Confirm the various tools required for installation:
Adjustable spanner: 1.
Drill: 1.
6.2mm drill bit – 1 (waste water hole).
Hole saw, Ø14mm: 1 (high-speed Steel or marble hole saw).
Philips and falthead screwdrivers: 1 of each.
Scissors: 1 pair.
18-21mm wrench: 1.
16-21mm wrench: 1.
Needle nose pilers: 1.
3. Confirm that you’ve all the connectivity accessories required for installation.
4. Prior to installation turn off the water and electricity.
2. Instructions for proper installation:
1. Inlet water metal hose and 3-way inlet water joint installation method (if the
metal hose diameter is 3/8” the 3-way inlet water joint must be purchased
separately).
First closet he inlet water valve. Unscrew from the metal hose. Remove the 3-way
inlet water joint from the water purifier accessories box, thread one end of the
inlet water 3-way joint into the inlet water valve outlet, one end of the newly
unscrewed metal hose should be screwed into the 3-way inlet water joint screw
nut (see diagram 1).
