BaehrTec A2000 operating instructions
English – V101 - effective 10/13
Page 31/58
4.6
Home function (button (17))
This button has two functions:
By briefly pressing the Home button you will be taken directly from the options menu to the
Work mode (see section
“Work mode”
).
By pressing this button for approximately 7 seconds, the base settings made by the factory
will be restored:
•
Speed of the handpiece motor = 6,000 rpm
•
Instrument rotation direction = clockwise
•
Suction level = 4+
•
Language = German
•
Sound = Aqua
•
Background colour = white
The set-up of the base settings cannot be changed.
By pressing the button for approximately 7 seconds, all settings (including
the values of the memory buttons) will revert to the factory settings.
The information (meter readings, etc.) will, of course, remain unaffected.
4.7
Memory buttons (buttons (29) - (31))
Your device has three memory buttons which you can use to save your preferred settings
in Work mode. These settings will be retained even if you turn off the device.
In order to save settings, please set them (instrument rotation speed, instrument rotation
direction and suction level) in Work mode and hold the memory button where you would
like to save these settings for more than 4 seconds. Once the settings are saved, you will
hear a sound and the respective memory storage space is shown on the display.
In the factory settings,
all
memory buttons are pre-assigned as follows:
•
Handpiece motor speed:
6,000 rpm
•
Handpiece motor rotation direction:
clockwise
•
Suction level:
4+
Please note that the settings you have just made will be saved if you
press and hold the button for more than 4 seconds. This means that the
settings that you may have previously stored on this memory button will
be lost.
In order to recall settings that were saved on a memory button, briefly press the desired
memory button. The saved settings are then applied. This will be indicated to you on the
display by showing the corresponding memory button.
Please note that when briefly pressing the memory buttons, you will only
hear a sound once you remove your finger from the button.
