BaehrTec A2000 operating instructions
English – V101 - effective10/13
Page 13/58
3.2
What you must always consider before every use!
It is essential that you read this section with the utmost care! It
contains important information on protecting yourself, others and the
device from damage!
The term BaehrTec A2000 used in this section refers both to the controller and the
handpiece.
Before use, please check whether the type of current and the mains voltage of the power
source are suitable for using the device. Information on the type of current and the mains
voltage can be found on the nameplate on the controller.
When setting up the device, ensure that it is placed on a level base, that it cannot fall
down and that the extracted air can escape easily.
Ensure that the BaehrTec A2000 remains out of reach of children.
Do not expose the device to direct heat sources (heaters, strong sunlight etc.).
Ensure that the power cable is not damaged due to squeezing,
snapping or rubbing on sharp edges. If you notice any damage to the
mains cable, please immediately stop working with your device, turn off
the main switch and immediately remove the safety plug from the safety
socket. To be able to work with the device again, please order a new
power cable. For the operation of your device, you may only use power
cables that have been approved by the manufacturer. If you require a
new cable, please contact the manufacturer. Operating the device using
different cables is not permitted.
Under no circumstances should you operate the device with a damaged
power cable.
Your device has a detachable connector plug mechanism (see section
“Rear view”)
Always ensure that you do not set up the device in such a way that it
is difficult to separate it.
Do not work with the BaehrTec A2000 in damp areas such as saunas or
swimming complexes. Wetness and moisture on the controller can lead
to dangerous current leaks, which poses the risk of an electric shock.
Disconnect the device immediately from the socket.
Please send the device in for service with a description of the
defect.
Please also avoid large differences in external temperature. This may result in
moisture (condensation) developing.
Protect the BaehrTec A2000 from frost.
The device must be switched off and disconnected from the mains before carrying out
any cleaning/maintenance work.
In the event of damage or malfunction to the device, please immediately remove the
safety plug from the socket.
The manufacturer accepts no liability for damages to objects, animals or persons which are
caused by incorrect operation of the BaehrTec A2000.
