Operating Manual BaehrTec A1200 / A2000
Page 56/64
English – V100 - Date 09/2017
5.5.5
Instrument changing aid (insertion and removal aid for very small
instruments)
To accompany your Easy-Clean clamping mechanism, we have developed an instrument
changing aid to make it easier for you to change (remove and insert) very small instruments
(instrument diameter approx. 1.5 mm – approx. 5.0 mm).
It is essential that you read this section with the utmost care! It contains
important information on protecting yourself, others and the device from
damage! It must only be used by trained professionals.
Never change an instrument on a device that is still connected to the mains.
Turn off the device at the main switch beforehand and disconnect it from the
power supply.
Caution – risk of injury! Never try to change the instrument on the
handpiece while the handpiece motor is running. The handpiece motor
must be switched off.
Only the appropriate tool should be used to change the instrument. Other types
and fields of application are carried out at your own risk, and may conceal
dangers. No form of misappropriation is permitted.
Improper use may lead to damage to persons or objects.
The manufacturer cannot be held responsible for damages caused by improper
use, unqualified staff or incorrect operating.
All warranty claims are void following improper use.
Clean the instrument changing aid after each use and make sure that it is
always in a perfect hygienic condition before use.
For hygiene reasons, please clean the instrument changing aid after use under
running water and then with Baehr quick surface disinfectant (Art-No. 11015).
The images are for illustrative purposes only. Subject to technical and optical
changes.