Operating Manual BaehrTec A1200 / A2000
Page 44/64
English – V100 - Date 09/2017
We have incorporated this maximum speed limit when operating using the
foot pedal for your safety. When working with the foot pedal, it is even
more important that you bear in mind the maximum permissible speed of
the instrument you are using.
Please keep your safety and the safety of your patient in mind.
Therefore, set the maximum speed before you work with the
instrument and check it each time you change instruments.
Only the original Baehr foot pedal may be used with the BaehrTec A2000.
Other foot pedal are not approved for use with the BaehrTec A2000.
Please do not connect any other foot pedals since your device may
malfunction and you could endanger yourself and others.
Furthermore, it could cause damage to your device.
Make sure that you never spill liquids on the foot pedal or use the foot
pedal on wet surfaces. If fluids should get into the foot pedal, do not use
it under any circumstances!
Please send the foot pedal in for service.
Therefore, never connect a damp or wet foot pedal, as this may cause
your device to function incorrectly and you may put yourself and others in
danger.
Furthermore, it could cause damage to your device.
5
Servicing and care
5.1
Safety notices
Never perform cleaning work or change a filter on a device that is still
connected to the mains.
Before sending in the device, it is essential that you remove the dust
bag
Only send in your device in an immaculate hygienic condition. Any
cleaning works will always be charged.
Due to safety regulations, you are required to carry out an individual
risk assessment for your electronic devices. On this basis you are
obliged to have your devices inspected. We recommend having your
devices inspected once a year.
Always send in your device with the original power cable.
