Operating Manual BaehrTec A1200 / A2000
English – V100 - Date 09/2017
Page 5/64
Please do not use the device in the following cases, and contact the manufacturer:
If the power cable / insulation shows signs of damage.
If the device was exposed to moisture and / or wetness.
If the device has been dropped and / or if the device housing is damaged.
In the event of lighting strike and / or surge, the device may be damaged. For this reason, we
also recommend installing surge protection and removing the plug during a storm and / or
after a long period of non-use in order to protect the device from voltage peaks.
Please observe the customary power supply specifications before connecting the device to
the mains.
Before using the device, be sure to observe section "Differences between BaehrTec A1200
and BaehrTec A2000".
2.1
Symbols
2.1.1
Symbols in these operating instructions
Warning!
This symbol indicates a danger to humans or the device. This symbol must always be given
the utmost attention. Read the corresponding sections especially carefully and adhere very
strictly to the specifications.
This symbol provides especially useful advice and gives additional information on operating
the device.
CE mark (Communauté Européenne) with the number of the certification authority. A product
bearing this mark meets the requirements of the corresponding EU guideline (the applicable
European Standard).
2.1.2
Type rpm with output details
Fig. 1a
BaehrTec A1200
Fig. 1b
BaehrTec A2000
