Page 2
For technical questions, please call 1-888-866-5797.
Item 59136
Sa
FE
ty
Op
Era
ti
O
n
Maint
Enanc
E
SE
tup
table of contents
Safety ......................................................... 2
Setup .......................................................... 4
Operation .................................................... 5
Maintenance ............................................... 7
Parts List..................................................... 8
Warranty .................................................... 11
iMpOrtant SaFEty inFOrMatiOn
read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
Basic Safety information
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
personal safety
1.
Stay alert, watch what you are doing and
use common sense when operating a tool.
Do not use a tool while you are tired or under
the influence of drugs, alcohol or medication.
A moment of inattention while operating tools
may result in serious personal injury.
2.
use personal protective equipment.
always wear eye protection.
Safety
equipment
such as non-skid safety shoes or a hard hat used for
appropriate conditions will reduce personal injuries.
Service
Have your tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the tool is maintained.
Specific Safety Warnings
1. Do not exceed rated capacity.
2. Place the Jack on a flat, level surface. Only
use this Jack on a hard, stable, clean, dry
surface that is capable of sustaining the weight
of the Jack and the load it is stabilizing.
3. Wear ANSI-approved safety goggles during use.
4. Prevent trailer wheels from moving using
wheel chocks while raising or lowering.
5. Before towing, fully raise Jack.
6. Keep out from under jack and tongue when applying
and releasing load or when jack is supporting load.
7. Inspect before use. Do not use if
parts are loose or damaged.
8. Use in accordance with the Department
of Transportation (DOT) regulations.
9. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
10. Apply force to jack vertically only.
Side forces will compromise the jack.
11. Do not use blocks for additional ground clearance.
12. Do not climb aboard any vehicle supported by jack.
13. This product is not a toy. Keep it
out of reach of children.
14. Follow all state regulations for towing when
using Trailer Jack, including using safety
chains securely attached to the towing vehicle
when the trailer is hooked to the vehicle.
