Badger Meter ModMAG M2000, User'S Installation And Operation Manual, Page: 16 / 56

Programming Page 14/51
MID_M2000_BA_02_1807
5. Programming
The LCD display with 4 lines and 20 digits shows following information:
Line Uni-directional Bi-directional
1 Meter type, software version and alternating error messages
2 Flow velocity (v)
3 Flow rate (R)
4 Totalizer T1 Totalizer T+
5 Totalizer T2 Totalizer T-
6 Pre-selection volume (PS) Net. totalizer TN
7 Pre-selection volume (PS)
Uni-directional Bi-directional
The display can be scrolled by using the up ▲ and down ▼ buttons.
Programming is accomplished by using the three functional buttons
▲
(+),
▼(
-) and E
(►)
.
You can move from the measuring mode to the programming mode by pressing twice the
button
E . While first pressing this button, you activate the backlight and while pressing it for
a second time, you get into the programming menu.
The cursor
→
on the left side of the display is moved upward and downward with the buttons
▲▼
. The menu manager or selection from a list is marked with the cursor and
acknowledged by pressing the button E .
To enter a parameter, the first number is marked with an underline 0. By pressing the
buttons + / -, you can increment or decrement them. As soon as the requested number has
been selected, you can acknowledge it by pressing the button E . After having entered the
last number, the value is stored by pressing the button E or press the button + in order to
edit the value again.
You get access to the individual menus through three programmable access levels:
Administrator, service and user level.
Access rights of the individual menu items is shown in the following with three symbols:
Administrator Service User
For programming the access levels, see the chapter “passwords”.
No passwords were set at the factory.
M - S e r i e s V 1 . 1 4
v = 0 . 0 0 0 0 m / s
R = 0 . 0 0 0 0 0 0 M 3 H
T 1 0 M^3
T 2 0 M^3
P S 0 M^3
M - S e r i e s V 1 . 1 4
v = 0 . 0 0 0 0 m / s
R = 0 . 0 0 0 0 0 0 M 3 H
T + 0 M^3
T - 0 M^3
T N 0 M^3
P S 0 M^3