Badger Meter Impeller Data Industrial 3100 Series, User Manual, Page: 27 / 28

SPECIFICATIONS
Voltage
12…24V DC/AC (limit: 8…35V DC); (limit: 8…28V AC)
DC current draw (~ 280 mA)
AC Power rating (~5 VA)
Display
16 character by two line alphanumeric Dot Matrix 3/8 in . (7 .95 mm) high backlit LCD
Operating Temperature
–4…158° F (–20…70° C)
Storage Temperature
–22…176° F (–30…80° C)
Dimensions
Panel Mount: 3 .78 in . W x 3 .78 in . H x 4 .79 in . D (96 mm x 96 mm x 122 mm)
Weight
Panel Mount: 12 oz .
Pulse and Relays
Both pulse and relay are fully functional as either totalizing or set point outputs
Pulse Electrical
1 Amp at 35V DC/30V AC
Closed
: 0 .5 Ω at 1 amp;
Open
: >10
8
Ω
Relay Electrical
Resistive Load :
5A @ 120V AC/30V DC
Inductive Load :
1A @ 120V AC/30V DC
Pulse/Unit Volume
(Totalizer)
Driving Source: flow total
Rate:
1 pulse per 1 .0000000 to
99999999 units
Contact Time: 1 to 9999 mS
Set-Point (Alarm)
Driving Source:
flow rate,
Btu rate, temperature 1,
temperature 2, delta T
Units : Any predefined or custom
unit
Set-Point
: 1 .0000000 to 999999999
Delay to Set : 1 to 9999 sec
Release Point
: 1 .0000000 to
999999999
Delay to Release : 1 to 9999 sec
Analog Output
Driving Source : flow rate
Range
: 4…20 mA; 0…20 mA
(isolated current sinking or sourcing)
Sinking
: 30V DS @ 0 mA max;
3 V @ 20 mA min
Sourcing : 600 Ω max load
USB Communication
Provides complete access to all programming and
operation features
Requirements
: USB 2 .0 A to Mini-B,
five-pin cable
RS-485 Communication
Supports Modbus and BACnet/MSTP
Accessories
Programming kit
Flow Sensor Inputs
Type Threshold Signal Limit Frequency Pull-up Impedance Aux. Power Calibration
Pulse-Di 2 .5V DC 30V DC 0 .4 Hz to 10 kHz 1K to 12V DC - 12V DC@30 mA K + Offset
Pulse-K Factor 2 .5V DC 30V DC 0 .4 Hz to 10 kHz - - 12V DC@30 mA Pulse/Gal
Pull-up K Factor 2 .5V DC 30V DC 0 .4 Hz to 10 kHz 1K to 12V DC - 12V DC@30 mA Pulse/Gal
Sine-K Factor - 30V DC 0 .4 Hz to 10 kHz - 10K Ω 12V DC@30 mA Pulse/Gal
Analog - 4…20 mA - 50 mA Fused - - 100 Ω 12V DC@30 mA Linear
Analog - 0…20 mA - 50 mA Fused - - 100 Ω 12V DC@30 mA Linear
Analog - 0…1V DC - 30V DC - - 100K Ω 12V DC@30 mA Linear
Analog - 0…5V DC - 30V DC - - 100K Ω 12V DC@30 mA Linear
Analog - 0…10V DC - 30V DC - - 100K Ω 12V DC@30 mA Linear
Rate Units of Measure: GPM; gal/sec; gal/hr; Mgal/day; LPS; LPM; LPH; ft 3 /Sec; ft 3 /min; ft 3 /hr;m 3 /sec;
m 3 /min; m 3 /hr; acre-ft/sec; acre-ft/min; acre-ft/hr; bbl/sec; bbl/min; bbl/hr; and field programmed custom units 0 .00 to 999999999
Total Units: gallons; Mgal; liters; ft 3 ; m 3 ; acre-ft; bbl; and field programmed custom units 0 .00 to 999999999
Specifications
Page 27 August 2014 CTL-UM-001026-EN-04