EPM-3 RF METER
The meter is equipped with RF communications to communicate dispense authorization and result information . Once a work
order has been set up, the operator simply pulls the trigger and the authorized amount of fluid for that meter will dispense .
The valve will automatically shut off when the full quantity has been dispensed . A
Top Off
feature allows additional quantities
to be dispensed and tracked after the valve closes . Upon completion of the dispense effort, the valve locks, prohibiting any
unauthorized dispense .
Key Description
The following keys (except for RESET and SHUT-OFF) are only active in the AUTO mode (or Manual mode) .
10, 1, 0.1
Used to enter the dispense quantity to be used .
In operational mode it shows the five latest
dispensed amounts .
TOTAL
Used to display the accumulated total of fluid
dispensed, as well as the resettable total when
held for 3 seconds .
AUTO
Used to enter and exit the auto mode when RF
communications are not available .
RESET
• Used to accept a dispense order from the
keypad .
• Used in normal operating mode (RF, manual
or auto) to clear the previously programmed
batch and to reset the meter .
• Used to reset the resettable total dispensed
while pressing the TOTAL button .
SHUTOFF
or
STOP
Used to stop the flow manually through an
electrical override .
EPM-3 Rf Meter
Page 28
December 2014
FMS-UM-01200-EN-01
