Page 18
September 2015
AUT-UM-01734-EN-03
Changing Factory Settings
Network Program
The radio network is used to differentiate multiple FMS networks For standard installations
the default setting of zero does not need to be changed
The network setting must be between 0…255 To change the network setting:
1 Press
1
to increment network setting, or press
0.1
to decrement network setting
2 Press
RESET
to advance to the
Power Level Display
screen
OTEE:
N
You can view the radio network by pressing and holding
TOTAL
and
10
simultaneously when not in
Programming Mode
Power Level Display
1 The radio power level is set at the factory The display is for validation purposes only
2 Press
RESET
to return to
Scale Factor
and
Unit of Measure
screen
OTEE:
N
You can view the power level by pressing and holding
TOTAL
and
1
simultaneously when not in
Programming Mode
Saving Changes
To save your changes and exit the programming mode:
1 Press and hold
TOTAL
and
AUTO
simultaneously The display flashes 3 times and goes blank
2 Press
RESET
to turn on the display
