DSY-UM-02260-EN-01 (April 2017)
Blancett B3100 Flow Monitor, Datalogging
Page 9
4.1.3 The event records
This log is used to record the events. These events have a generic or a specific content
(manufacturer defined). The B3100 makes one record every time an event occurs. When
the maximum amount of records is made, the eldest record is overwritten by the newest
record.
5 Program the data logging function
5.1 Program the interval log
ACTION
RESULT
R
EMARK
1. Press the PROG button
for at least 7 seconds.
•
The SETUP indicator comes
on continuously.
•
The setup menu TOTAL
shows.
To enter the setup menu.
2. Press the ► button to
find the DATALOG
menu.
•
The SETUP indicator stays
on continuously.
•
The setup menu DATALOG
shows.
Press the ► button as many
times as applicable.
3. Press the ▲ button to
find the LOG INT menu
item.
•
The LOG INT menu item
shows
Press the ▲ button as many
times as applicable.
4. Press the PROG button
momentarily.
•
The PROG indicator blinks
continuously.
If you wait too long, the
program mode goes off and
changes are not saved, this is
normal behavior.
5. Press the ▲ button to
make the required
selection.
•
The PROG indicator blinks
continuously.
•
You can set the interval
time.
The interval time defines the
time between two records.
6. Press the PROG button
momentarily.
•
The PROG indicator goes
off.
•
The selection is saved.
•
The selection shows.
If you do not press the PROG
button to confirm, your
selection is not saved.
7. Press and hold the
PROG button for at least
3 seconds.
•
The SETUP indicator goes
off.
•
The operator menu shows.
The B3100 is ready for daily
use.
