DSY-UM-02260-EN-01 (April 2017)
Blancett B3100 Flow Monitor, Datalogging
Page 11
ACTION
RESULT
R
EMARK
13. Press the ▲ and the
►
button to change the
time.
•
The selected time shows.
Only the digit that blinks can
be changed. Use the ► button
to scroll between the digits.
14. Press the PROG button
momentarily.
•
The PROG indicator goes
off.
•
The selection is saved.
•
The selection shows.
If you do not press the PROG
button to confirm, your
selection is not saved.
NOTICE
The next step is applicable for all selections.
15. Press and hold the
PROG button for at least
3 seconds.
•
The SETUP indicator goes
off.
•
The operator menu shows.
The B3100 is ready for daily
use.
5.3 Program the events log
It is not possible to program the event records.
The event records are manufacturer defined.
5.4 Program the internal clock
ACTION
RESULT
R
EMARK
1. Press the PROG button
for at least 7 seconds.
•
The SETUP indicator comes
on continuously.
•
The setup menu TOTAL
shows.
To enter the setup menu.
2. Press the ► button to
find the DATALOG
menu.
•
The SETUP indicator stays
on continuously.
•
The setup menu DATALOG
shows.
Press the ► button as many
times as applicable.
3. Press the ▲ button to
find the TIME HMS menu
item.
•
The TIME HMS menu item
shows
Press the ▲ button as many
times as applicable.
4. Press the PROG button
momentarily.
•
The PROG indicator blinks
continuously.
•
The first digit of the time
blinks.
If you wait too long, the
program mode goes off and
changes are not saved, this is
normal behavior
5. Press the ▲ and the
►
button to change the
time.
•
The selected time shows.
Only the digit that blinks can
be changed. Use the ► button
to scroll between the digits.
6. Press the PROG button
momentarily.
•
The PROG indicator goes
off.
•
The selection is saved.
•
The selection shows.
If you do not press the PROG
button to confirm, your
selection is not saved.
7. Press the ▲ button to
find the DATE YMD
menu item.
•
The DATE YMD menu item
shows
Press the ▲ button as many
times as applicable.
