DSY-UM-0
2
260-EN-01 (April 2017)
Blancett B3100 Flow Monitor, Datalogging
Page 10
5.2 Program the daily log
ACTION
RESULT
R
EMARK
1. Press the PROG button
for at least 7 seconds.
•
The SETUP indicator comes
on continuously.
•
The setup menu TOTAL
shows.
To enter the setup menu.
2. Press the ► button to
find the DATALOG
menu.
•
The SETUP indicator stays
on continuously.
•
The setup menu DATALOG
shows.
Press the ► button as many
times as applicable.
3. Press the ▲ button to
find the DAILYLOG menu
item.
•
The DAILYLOG menu item
shows
Press the ▲ button as many
times as applicable.
4. Press the PROG button
momentarily.
•
The PROG indicator blinks
continuously.
If you wait too long, the
program mode goes off and
changes are not saved, this is
normal behavior
5. Press the ▲ button to
make the required
selection.
•
The PROG indicator blinks
continuously.
•
You can make the required
selection.
Select SINGLE for one record
per day or DUAL for two
separate records per day.
Select OFF if this log function
is not required.
6. Press the PROG button
momentarily.
•
The PROG indicator goes
off.
•
The selection is saved.
•
The selection shows.
If you do not press the PROG
button to confirm, your
selection is not saved.
7. Press the ▲ button to
find the DAILY 1 menu
item.
•
The DAILY 1 menu item
shows
In this menu item, the time for
the creation of the record is
set.
8. Press the PROG button
momentarily.
•
The PROG indicator blinks
continuously.
•
The first digit of the time
blinks.
If you wait too long, the
program mode goes off and
changes are not saved, this is
normal behavior
9. Press the ▲ and the
►
button to change the
time.
•
The selected time shows.
Only the digit that blinks can
be changed. Use the ► button
to scroll between the digits.
10. Press the PROG button
momentarily.
•
The PROG indicator goes
off.
•
The selection is saved.
•
The selection shows.
If you do not press the PROG
button to confirm, your
selection is not saved.
NOTICE
The next steps are only applicable and operational when the DAILYLOG is set to
DUAL. If the Daily 1 and Daily 2 time are the same, only the Daily 1 log is recorded.
11. Press the ▲ button to
find the DAILY 2 menu
item.
•
The DAILY 2 menu item
shows
In this menu item, the time for
the creation of the second
record is set.
12. Press the PROG button
momentarily.
•
The PROG indicator blinks
continuously.
•
The first digit of the time
blinks.
If you wait too long, the
program mode goes off and
changes are not saved, this is
normal behavior.
