REPEAT WITH FOUR BOLTS (M) FOR THE TABLE RIGHT SIDE (I)!
3
M
I
J
H
G
M
A
G
STEP 3: Insert the TABLE TOP (J) into the corresponding holes on the TABLE RIGHT SIDE (I).
YOU MUST MATCH UP THE D1 and D2 INDICATORS THAT ARE MOLDED INTO THE PLASTIC PARTS.
Insert the TABLE RAIL (G) into the corresponding holes on the TABLE RIGHT SIDE (I).
The Table Rail will insert only one direction (match up the shape of the holes).
Attach the TABLE LEFT SIDE (H) to the TABLE TOP (J) and TABLE RAIL (G).
YOU MUST MATCH UP THE D3 AND D4 INDICATORS THAT ARE MOLDED INTO THE PLASTIC PARTS.
Secure the TABLE LEFT SIDE (H) using FOUR of the BOLTS (M). Be sure BOLTS (M) are twisted to
tighten them properly using the ASSEMBLY TOOL (A).
I
