background image

READ ALL INSTRUCTIONS 

before use of this product. Keep instructions for future use. Use only the parts and 

hardware provided by Badger Basket

®

. Do not use the product if it is damaged, broken, or missing parts. Hardware 

may include small parts. 

Choking Hazard! 

Keep unassembled parts out of the reach of small children.

 DO NOT 

allow 

anyone to climb, stand on, or play on or inside of this product. It is not a step stool or ladder. 

Periodically check 

to 

make sure all the screws remain tight. It is recommended that the high chair be used in the upright position only by 

children capable of sitting upright unassisted. This is usually around six (6) months of age. 

PREVENT SERIOUS 

INJURY OR DEATH FROM FALLS OR SLIDING OUT.

 Your child MUST ALWAYS be secured with the 5-point seat 

harness regardless of child’s age and reclined/upright position of the seat. The tray is not designed to hold the child in 

the chair. 

ALWAYS 

keep your child in view while in the chair. 

NEVER

 leave your child unattended, not even for “just a 

minute”. 

DO NOT

 make adjustments to the seat height or upright/recline position while child is in the chair. No product 

or a heating appliance such as electric or gas heaters.

WARNING - FAILURE TO FOLLOW THESE 

WARNINGS AND THE INSTRUCTIONS COULD 

RESULT IN SERIOUS INJURY OR DEATH

USE AND CARE INSTRUCTIONS:

Wipe plastic parts with a damp cloth and mild soap as needed. Seat pad can be machine washed, cold water gentle cycle; air 

dry only. Do not tumble dry or iron! Seat pad may be dry cleaned. Insert feeding tray (PART O) is dishwasher safe.

BEFORE YOU BEGIN ASSEMBLY:

Check all parts. If anything is missing or not satisfactory, 

please DO NOT call the store or return the product to them. 

Please go online to: 

http://www.badgerbasket.com/parts

Most problems are resolved without you needing to leave home. 

When emailing or calling us, please have this instruction manual, 

your product model number, and your Version Code ready.

Summary of Contents for ENVEE II











Reviews: