Bad Elf Flex BE-GPS-5500, User Manual

Page: 41 / 57

5. Within 5-10 seconds, you should see a prompt from windows showing pairing is
complete. Once this action is completed, the message “Ready to pair” will change to
“Paired”.
At this point you have successfully paired your Bad Elf Flex with your Windows computer. Next,
you will need to determine the COM port assigned by the operating system.
1. Click on the icon to the left of BE5500-XXXXXX
2. Click on “More Bluetooth Options”
3. A Bluetooth settings dialog will open
4. Click on the “COM Ports” tab
5. The COM port with your device serial number labeled as “Outgoing” is the COM port you
should use for your application.
Copyright © 2021. Bad Elf, LLC. 40
All Rights Reserved.