Bad Elf Flex BE-GPS-5500, User Manual

Page: 27 / 57

● Press the back button to return to the settings
menu
Digital Level Calibration
The digital level provides a visual reference to ensure proper
vertical orientation of the Bad Elf Flex. The bubble level is
shown on the
Primary GNSS Status Page . Calibrate the
receiver using this utility while positioning the receiver on a
level surface.
● Set the Flex on a level surface. Press the enter button
to save the calibration. The bubble should be
approximately centered in the image upon calibration,
though some fluctuation may occur.
● Press the back button to return to the settings
menu
Note, this calibration is permanently stored with the Bad Elf
Flex and does not need to be repeated after powering off.
Copyright © 2021. Bad Elf, LLC. 26
All Rights Reserved.