Kawasaki FX730V
This machine has an oil drain hose installed on
the engine to allow for easier oil changes. Bad
Boy recommends that the oil and filter be
changed at intervals of 50 usage hours or
yearly, whichever occurs first. The oil
capacity is 2 quarts. Bad Boy 10W-30
synthetic blend engine oil is recommended for
maximum protection.
3.1 Changing your engine oil and oil filter
1)
Remove oil dipstick and open oil drain
using a
10 mm socket or a flat head
screwdriver until oil begins flowing.
Allow oil to completely drain. (Make
sure to have an oil pan ready to
capture old oil and properly dispose old
oil.)
2)
The oil filter is located on the right side
of the engine. Clean area around oil
filter. Place a container under the oil
filter to capture any oil and remove
filter. Wipe off mounting surface and
reinstall drain plug. Torque to 10 ft*lb.
3)
Place new fil
ter
in shallow pan with
open end up. Fill with new oil until oil
reaches the bottom of the threads.
Allow 2 minutes for oil to be absorbed
by
filter material.
PAGE
31
4)
Apply a thin film of clean oil to rubber
gasket
on new filter
5)
Refer to instructions on oil filter for proper
installation.
6)
Fill crankcase with approximately 2 quarts
of
new oil. Level should top of indicator on
dipstick.
7)
Reinstall oil fill/dipstick and tighten securely.
8)
Start engine; check for oil leaks. Stop
Engine;
correct oil leaks. Recheck oil level
9)
Dispose of used oil and filter in accordance
with local ordinances.
Summary of Contents for Outlaw 6100
Page 46: ...PAGE 46...
