PAGE 22
Under the rear of the mower, you will find
the two levers shown in the image. These
bypass levers serve as a neutral for
moving the mower while the engine is not
running. Pull the levers out and lock them
into place to activate the bypass.
When adjusting the tracking on the mower,
the length of the pushrods can be changed
by screwing the pivot joint in or out on the
ends of the rods. Shortening the overall
length of the rod slows the pump down.
Lengthening the rod will increase the speed
of the pump.
Summary of Contents for Outlaw 6100
Page 46: ...PAGE 46...
