Bad Boy MZ Magnum 54, Owner'S, Service & Parts Manual, Page: 27 / 52

PAGE
27
SECTION 5: FRAME
The front fork nuts require a torque of 40ft-lbs. While
applying this torque, turn the fork itself to ensure no
damage is done to the bearing. This operation is only
necessary if a repair requires it. To access the recessed
front fork nuts, remove the dust cap by prying gently using
a flat-head screwdriver. Once cap is removed, a 36mm
socket will be needed for top nut. You will need to secure
the bottom nut with a 1 1/2". wrench. Once you have
torqued the nuts to 40 ft.-lbs., reapply the dust cap by
gently tapping around its edges. Do NOT hit center of cap.
T
orque rear wheel lugs to 65-75ft. lbs. Re-torque at
every oil change and check every morning.
The pump belt tensioner is located under the engine
and has a grease fitting at its pivot point. Grease at
every engine oil change.
The deck belt tensioner is located at the rear of
t
he deck and has a grease fitting on its pivot
The control arm blocks have grease fittings located on
the top of each block. Grease one time a year.
Drive Arm Grease Zerk
40 ft lbs.