PAGE 13
SECTION 7:
CONTROLS
7.1
Ignition Switch—
Bad Boy mowers have a three position ignition switch: off, run, and start.
With key inserted, rotate it clockwise to
START pos
ition and release key when engine
starts, and switch will automatically return to
t
he RUN position.
7.2
Throttle Control—
A cable is connected to the engine throttle for controlling engine speed.
Move lever forward to increase engine rpm, move lever backward to decrease engine rpm.
7.3
Choke Control—
(Not Shown) T
he choke control, located to the right of the operator’s
left,
is a ‘push-pull’ type. When the choke knob is pushed in, the choke is in the off (run)
position. When the choke is pulled out it is in the on (start) position.
Do not operate
the machine in the on (start) position
.
7.4
Control Levers—
These levers control the mower’s speed, direction, and neutral lock
.
These levers are used to steer, accelerate, decelerate and change direction.
7.5
Blade Engage Switch—
This switch engages the blades. Pull the switch up to engage the
blades and push the switch down to disengage the blades.
7.6
Deck Height Control
—
The deck height dial is used to set the cut of the deck
.
7.1
7.5
7.2
7.6
7.4
Summary of Contents for MZ Magnum 54
