Bad Boy Diesel 7200, Owner'S, Service & Parts Manual, Page: 22 / 56

SECTION 5: FRAME
For non-suspension models, torque front fork castle nut
to 40 ft.lbs. Be sure to spin the fork while torquing the nut
to ensure that no bearing damage is done. The torque for
suspension forks should be 50 ft. lbs.
Torque rear wheel lugs to 65-75 ft. lbs.
Re-torque at every oil change.
There is one grease fitting in each front wheel and one in
each front caster bearing housing. Grease at every engine oil
change.
There is one grease fitting on each of the actuator bar pillow
blocks located under the fuel tanks. Grease twice a season.
PAGE 22