background image

SECTION 8:

 MOVING INOPERABLE MOWER

8.1  Do not tow machine. Use a winch to load on a trailer for transporting.

8.2 

ATTENTION: RETURN BYPASS VALVES TO OPERATING POSITION BEFORE RUNNING 
MOWER FOLLOWING REPAIRS. 

8.3  If it is necessary to move mower when the engine is inoperable, the hydraulic drive pumps 

are equipped with bypass valves. Before moving the mower, turn the bypass valves 
counterclockwise one-half to one revolution. The valve stems on each pump are located near 
the top and are identified as a hex stud.

8.4  Your Bad Boy Mower Weighs:  

DIESEL SERIES: 

1607—1935 lbs

 

 

 

*** Weights fluctuate with the addition of accessories. 

8.5  As you can see by the weights of the machines, you shouldn’t ever try to push or pull a Bad 

Boy Mower by hand. This could cause serious bodily injury. 

8.6   Hopefully, you’ll never need to use this section of the manual. However, if you do, use 

extreme caution when moving machine!

SECTION 9:

 INSTRUMENTATION 

9 .1 

Electronic Hour Meter—Registers Hour increments up to 9,999.9 total hours. This meter 
records the cumulative time the engine is running. 

PAGE  13

Summary of Contents for Diesel 7200

























































Reviews: