Bad Boy CZT 6000 Elite Series, Owner'S, Service & Parts Manual

Page: 13 / 52

SECTION 8: MOVING INOPERABLE MOWER
8.1 Do not tow machine. Use a winch to load on a trailer for transporting.
8.2 ATTENTION: RETURN BYPASS VALVES TO OPERATING POSITION BEFORE RUNNING
MOWER FOLLOWING REPAIRS.
8.3 If it becomes necessary to move an inoperable mower, the drive transaxles are equipped with
bypass valves that allow the drive tires to rotate freely. These bypass valves are located on
top of the Outlaw’s transaxles and on the inner side of the Outlaw Extreme’s transaxles. Each
require a quarter turn to allow for proper bypass.
8.4 Your Bad Boy Mower Weighs: OUTLAW SERIES: 1180—1310 lbs
*** Weights fluctuate with the addition of accessories.
8.5 As you can see by the weights of the machines, you shouldn’t ever try to push or pull a Bad
Boy Mower by hand. This could cause serious bodily injury.
8.6 Hopefully, you’ll never need to use this section of the manual. However, if you do, use
extreme caution when moving machine!
SECTION 9: INSTRUMENTATION
9 .1 Electronic Hour Meter—Registers Hour increments up to 9,999.9 total hours. This meter
records the cumulative time the engine is running.
9 .2 Oil Light—Alerts the user of a low oil level situation when lit.
PAGE 13