26
3" (7,6 cm)
x42
RAFTERS
PARTS REQUIRED:
DOOR
2 x 4 x 93-3/16" (5,1 x 10,2 x 236,7 cm)
x7
BOA
You have finished installing your rafters.
FINISH
7
Place rafter on front and back wall doublers. Line up rafter centered with marks. Ensure
rafter is flush to back wall panel
(Fig. A)
and flush down on top of back wall doubler
(Fig. B)
.
Secure back of rafter using 3" screw installed centered into outer rafter end
(Fig. A)
.
Toenail each end of rafter into doubler using 3" screws
(Fig. B, Fig. D)
.
Repeat steps 2 through 5 to install (6) remaining rafters.
Line up rafter centered with marks on front doubler. Ensure rafter is flush to front wall panel
(Fig. C)
. and resting
flush on top of front doubler
(Fig. C)
.
Secure front of rafter using 3" screw installed centered into outer rafter end
(Fig. C)
.
2
3
5
6
3" (7,6 cm)
Screw
Flush
Fig. A
3" (7,6 cm)
Screws
toenailed
Flush
Fig. B
3" (7,6 cm)
Screws
toenailed
Fig. D
DO NOT OVER-DRIVE SCREW THROUGH PANEL.
BEGIN
Starting at end as shown, measure and mark location of each rafter.
1
4
10"
(25,4 cm)
26"
(66,1 cm)
42"
(106,7 cm)
58"
(147,4 cm)
90"
(228,6 cm)
106"
(269,3 cm)
74"
(188 cm)
DOOR
3" (7,6 cm)
Screw
Flush
Fig. C
Flush
BEGIN HERE
