STEP 2
INSERT (2) 2-1/2" BOLTS, LOCK WASHERS
AND 1-1/2" BARREL NUTS INTO TOP EDGE OF
W71 SWING BEAM SUPPORT, AS SHOWN.
ATTACH E77 ANGLE BRACES TO W71 SWING
BEAM SUPPORT USING 4- 1/2" BOLTS, LOCK
WASHERS AND 7/8" BARREL NUTS.
ATTACH H79 END SUPPORT TO E77 A
NGLE BRACES USING 2" BOLTS, LOCK WAS
HERS AND 7/8" BARREL NUTS. NOW ATTACH
H79 END SUPPORT TO W71 SWING
BEAM SUPPORT USING 2" LAG SCREWS AND
LOCK WASHERS.
ATTACH H80 GROUND BOARD TO E77 A
NGLE BRACES USING7/8".
SWING BEAM ASSEMBLY
THIS SAFE-T-FUSE HARDWARE
MUST BE MOUNTED TO IMPROVE
THE STRUCTURAL INTEGRITY OF
THE SWING BEAM.
:
(
+
(
+
E77 - ANGLE BRACE - W100991
1 3/8"x3 3/8"x74 3/8" (36x86x1890)
H79 - END SUPPORT - W100992
1"x3 1/2"x42" (24x86x1072)
H80 - GROUND BOARD - W100990
1"x3 3/8"x87 3/8" (24x86x2218)
BOLT WH
5/16x2
BOLT
WH
5/16x2 1/2
BOLT WH
5/16x4 1/2
LAG SCREW
WH 5/16x2
WASHER
LOCK EXT
12x19
WASHER
LOCK EXT
8x19
NUT BARREL
WH 5/16x7/8
NUT BARREL
WH 5/16x1 1/2
W71 - SWING BEAM SUPPORT - W102305
2"x3 3/8"x46 1/8" (50x86x1170)
