Backyard BY14-101-003-02 Owner'S Manual Download Page 9

Page: 9 / 24

Need help? 1.800.762.1142

Do not return to place of purchase.

Recipes

BlueRhino.com/recipes

Replacement Parts

parts.BlueRhino.com /

1.800.762.1142

Cleaning and Care

CAUTION:

1. All cleaning and maintenance should be done when grill is cool

and with the fuel supply disconnected.

2. Do NOT clean any grill part in a self-cleaning oven. The extreme

heat will damage the finish.

3. Do NOT enlarge valve orifices or burner ports when cleaning the

valves or burners.

Notices

1.  This grill should be thoroughly cleaned and inspected on a regular basis.
2.  Abrasive cleaners will damage this product.
3.  Never use oven cleaner to clean any part of grill.

Before Each Use

1. Keep the grill area clean and free from any

combustible materials, gasoline, and other
flammable vapors and liquids.

2. Do NOT obstruct the flow of the combustion of LP

gas and the ventilation of air.

3. Keep the ventilation opening(s) of the LP gas tank

area free and clear from debris.

4. Visually check the burner flames to make sure

your grill is working properly (Figure 8).

5. See below for proper cleaning instructions.
6. Check for obstructions of airflow to the burners.

Spiders, insects and webs can clog the burner/
venturi tube. A clogged burner/ venturi tube can
lead to a fire.

Cleaning Surfaces

1. Wipe surfaces clean with mild dishwashing

detergent or baking soda mixed with water.

2. For stubborn surfaces, use a citrus-based

degreaser and a nylon scrubbing brush.

3. Rinse clean with water.
4. Allow to air dry.

Cleaning Main Burners

1. Turn regulator/control knob to “OFF .”

Note: A “poof” sound is normal as the last of the
LP gas is burned.

2. Disconnect LP gas tank per “Disconnecting LP

Gas Tank” section.

3.  Remove regulator/control knob and wind guard.
4.  Remove cooking grid and heat plate.
5.  Disconnect wire from igniter, if applicable.
6.  Remove burner.
7.  Remove all food residue and dirt from burner surface.
8.  Disconnect wire from spark electrode.
9.  Clean inlet of burner with small bottle brush or compressed air.
10.  Clean any clogged ports with a stiff wire (such as an opened paper clip).
11.  Inspect burner for any damage (cracks or holes). If damage is found, replace with a new

burner from manufacturer.

12.  Reinstall burner. Reconnect igniter (if applicable), wind guard and regulator/control knob.
13.  Replace heat plate and cooking grid.
14.  Connect LP gas tank per “Installing LP Gas Tank” section.
15.  Perform leak test per “Checking for Leaks” section.

Before Storing

1. Turn LP gas tank valve to “CLOSED.”
2. Turn regulator/control knob to “OFF .”

Note: A “poof” sound is normal as the last of the LP gas is burned.

3.  Disconnect LP gas tank per “Disconnecting LP Gas Tank” section.
4.  Clean all surfaces.
5.  Lightly coat the burner(s) and cooking grid with cooking oil to prevent excess rusting.
6.  If storing the grill indoors, disconnect the LP tank per “Disconnecting LP Gas Tank” section.
7.  Place the protective cap cover on the LP tank and store the tank outdoors in a well-

ventilated area out of direct sunlight.

8. If storing the grill outdoors, cover the grill with a grill cover for protection from the weather.

Product Registration

For faster warranty service, register your product immediately at BlueRhino.com/warranty or by
call 1.800.762.1142.

Replacement Parts

Replacement parts can be found at parts.BlueRhino.com or by calling 1.800.762.1142.

Limited Warranty

Blue Rhino Global Sourcing, Inc (“Blue Rhino”) warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled, maintained, and operated
in accordance with the printed instructions accompanying it, then for a period of one (1) year
from the date of purchase, all parts in such product shall be free from defects in material and
workmanship. Blue Rhino may require reasonable proof of your date of purchase. Therefore,
you should retain your sales slip or invoice. This Limited Warranty shall be limited to the repair
or replacement of parts, which prove defective under normal use and service and which Blue
Rhino shall determine in its reasonable discretion upon examination to be defective. Before
returning any parts, you should contact Blue Rhino’s Customer Care Department using the
contact information listed below. If Blue Rhino confirms, after examination, a defect covered
by this Limited Warranty in any returned part, and if Blue Rhino approves the claim, Blue Rhino
will replace such defective part without charge. If you return defective parts, transportation
charges must be prepaid by you. Blue Rhino will return replacement parts to the original retail
purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident,
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or
service by you or any third party, or failure to perform normal and routine maintenance on
the product as set out in this owner’s manual. In addition, the Limited Warranty does not cover
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage,
after purchase.
This Limited Warranty is in lieu of all other express warranties. Blue Rhino disclaims all
warranties for products that are purchased from sellers other than authorized retailers or
distributors, including the warranty of merchantability or the warranty of fitness for a particular
purpose. Blue Rhino ALSO DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Blue Rhino SHALL HAVE NO LIABILITY TO PURCHASER OR ANY THIRD
PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
Blue Rhino further disclaims any implied or express warranty of, and assumes no responsibility
for, defects in workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or
limitation of special, incidental or consequential damages, or limitations on how long a warranty
lasts, so the above exclusion and limitations may not apply to everyone.
Blue Rhino does not authorize any person or company to assume for it any other obligation
or liability in connection with the sale, installation, use, removal, return, or replacement of its
equipment, and no such representations are binding on Blue Rhino.
Blue Rhino Global Sourcing, Inc.
Winston-Salem, North Carolina 27105 USA
1.800.762.1142