![background image](http://html1.mh-extra.com/html/backyard-products/heartland-catalina/heartland-catalina_assembly-manual_3346894019.webp)
17
x 3
M x10
J
J
Flush
2
LADDER SUPPORTS
J
x2
1-3/8 x 5-3/8 x 138" (3,5 x 13,7 x 350,5 cm)
PARTS REQUIRED:
Fig. A
Flush
Pre-drill 1/8" (0,3 cm) holes as shown through rafter.
Secure rafter supports
fl
ush to top of rafter using two 3" (7,6 cm) screws per support
(Fig. A)
.
Repeat steps 1-4 to make two more ladder supports.
3
FINISH
4
3" (7,6 cm)
x120
1/8" (0,3 cm)
Drill Bit
M
x30
M
1-3/8 x 3-3/8 x 39-11/16" (3,5 x 8,6 x 100,8 cm)
1
BEGIN
3/4" (1,9 cm)
2" (5,1 cm)
(2) 3" (7,6 cm)
screws
Orient two
J
rafters as shown on
fl
at surface with angled edge down and
marked edge up.
Mark holes on face of rafter centered on marks as shown
(Fig. A)
.
NOTE:
Angled
end down