35
ROOF PANELS
Move to the opposite end. Using the long
edge of the panel as a lever move the panel
side-to-side until the top corner is flush
to the peak
(Fig. C)
and there is a 1/2"
measurement to the gable trim
(Fig. D)
.
You may need to move your backwall to get
the 1/2" measurement. Secure panel with
two 2" nails in the corners.
2
You must square the roof by attaching one panel first. You will use the panels’ long
edge as a lever to bring your roof into square. Commonly known as “racking”.
Roof panels may cause serious injury
until securely fastened.
Attach the
48 x 96"
panel with the rough
side up (painted-grid lines side) with a 1/2"
measurement on the gable trim
(Fig A)
and
the panel flush at the peak
(Fig. B)
.
Secure panel with two 2" nails in
the corners.
1
BEGIN
Two Nails
48"
(121,9 cm)
1/2"
(1,3 cm)
1/2"
(1,3 cm)
Flush at peak.
Fig. B
Gable
Trim
Gable
Trim
Fig. D
Flush at peak.
Fig. C
2" (5,1 cm)
PARTS REQUIRED:
x8
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x2
Fig. A
