42
Install stakes into 3 x 3" uprights.
Locate stakes as shown.
Make sure all base pieces and uprights are resting
flat on the ground.
It may be necessary to loosen the soil beneath
Playset to make everything level.
Instructions for anchoring your playset product to the ground.
1.
Determine the final location of your playset product.
2.
Place the Anchor Stakes adjacent to the base and near
the corners of your playset product (at the bottom of
the legs on swing sets) and twist the auger-style Anchor
Stakes into the ground until only the loop is exposed.
3.
Place the metal strap through the loop of the
Anchor Stake and secure it to the unit with a lag screw
and washer as shown.
Note: Attach the strap to the unit with as little play as
possible using whatever holes in the strap work the best.
1-1/2" Lag Bolts
x2
Flat Washers
x2
x2
WS 4521
TOWER UPRIGHT
A FRAME
Flat Washers
x2
Metal Anchor Straps
x2
1-1/2"
Lag Bolts
x2
x2
WS 4521
STAKES
INSTALL
SWING
BEAM
SIDE
Metal Anchor
Straps
x2
Summary of Contents for 4367
Page 2: ...This page intentionally left blank...
Page 51: ...This page intentionally left blank...
Page 59: ...8...
Page 63: ...This page intentionally left blank...