ATTACH K5 FLOOR RAILS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
WASHER
LOCK EXT
8x19
(16)
WASHER
LOCK EXT
12x19
(2)
T-NUT 5/16
(6)
BOLT WH
5/16x1
(2)
NUT BARREL
WH 5/16x5/8
(2)
K1
K1
L3
M10
K5
M5
E2
E2
LAG SCREW
WH 5/16x2
(8)
LAG SCREW
WH 5/16x2 1/2
(6)
SCREW PFH
8x1 1/2
(6)
ATTACH M9 ANGLE BRACE TO L3 AND M10 BOARDS USING (2) 1" BOLTS, LOCK
WASHERS AND 5/8" BARREL NUTS, AS SHOWN.
ATTACH L3 GROUND BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND
THROUGH HOLES PROVIDED IN M5 BOARDS USING (4) 2-1/2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
ATTACH M10 SAFETY BOARD TO THE EDGES OF BOTH E2 FORT UPRIGHTS AND
THROUGH HOLES PROVIDED IN M5 BOARDS USING (2) 2-1/2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
STEP 3
USING A HAMMER, INSTALL (4) 5/16" T-NUTS INTO THE HOLES PROVIDED ON THE
INSIDE OF K1 ROOF SWING BEAM SUPPORT AND (2) 5/16" T-NUTS INTO THE HOLES
PROVIDED ON THE OUTSIDE SURFACE OF K1 SUPPORT, AS SHOWN.
ATTACH (2) M5 FACE BOARDS TO THE EDGES OF BOTH E2 FORT UPRIGHTS USING (6)
1-1/2" WOOD SCREWS, AS SHOWN.
ATTACH K1 SUPPORT TO THE EDGES OF BOTH E2
FORT UPRIGHTS AND FLUSH TO TOP EDGES OF E2
UPRIGHTS USING (4) 2" LAG SCREWS AND LOCK
WASHERS, AS SHOWN.
M9
K1 - ROOF SWING BEAM SUPPORT - W100682
5/8"x5 1/4"x51 5/8" (16x134x1310)
(1)
M5 - FACE BOARD - W101599
5/8"x3 3/8"x43 1/8" (16x86x1094)
(2)
M9 - ANGLE BRACE - W100696
5/8"x3 3/8"x35 5/8" (16x86x904)
(1)
L3 - GROUND BOARD - W101602
5/8"x4 3/8"x46 7/8" (16x112x1191)
(1)
M10 - SAFETY BOARD - W100701
5/8"x3 3/8"x33 7/8" (16x86x860)
(1)
K5 - FLOOR RAIL - W103705
5/8"x5 1/4"x30" (16x134x762)
(1)
