background image

Th

  e store where you made your purchase  

does not stock parts for this item. 

If you have assembly questions or you are missing or 

have damaged parts, please call

Please have the following information ready when you make your call:

• Model Number of the product located on the front of the assembly manual

• Description of the part from the parts list

1-800-856-4445

Read entire assembly manual, paying special attention to the important tips and safety information.

Ensure there are no missing pieces b

y fi

 rst separating and identifying all parts.

Make sure to check packing material for small parts that may have fallen out during shipment.

Structures are not intended for public use. The Company does not warranty any of its residential structures
subjected to commercial use such as: Daycare, Preschool, Nursery School, Recreational Park, or any similar
Commercial Application.

This manual contains helpful information concerning assembly preparation, installation procedure and
required maintenance.

Always keep safety in mind as your structure is being built.

Keep these instructions for future reference.

MISSING A PART?

CALL US BEFORE GOING 

BACK TO THE STORE

you can also visit www.backyarddiscovery.com 

or e-mail [email protected]

Please Read This Before Starting Assembly

Owner’s Manual

3

Summary of Contents for LITTLE BRUTUS 2051171B






















Reviews: