Assembly
Phase 13
Parts needed:
• (1) WINDOW SHELF ASSEMBLY
Phase Notes
• Assemble with hardware as shown.
Hardware needed:
• (3) BP - SCREW PFH 8x1-1/2 - H100086
• (2) BT - SCREW PFH 8x2-1/2 - H100090
Step 1: Pre-drill & attach Window
Shelf Assembly to 'WP2' right wall
using screws 'BP' & 'BS', as shown.
Note: It is vital that the fort
be level before and after
each phase of assembly.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Note: Do not overtighten screws, overtightening
may cause the screw to stick through the boards
and may cause sharp points. The head of the
screw should NOT sink into the wood for this
phase, it should be flush.
WP2
K3
M20
BP
BT
Screws 'BT'
assembled
from inside
of play
house.
