Assembly
Phase 1
Phase Notes
• Assemble with hardware as shown.
• For ease during assembly, assemble uprights flat on the ground.
Hardware needed:
• (8) BN - SCREW PFH 8x1 - H100085
• (40) BQ - SCREW PFH 8x1-1/4 - H100087
• (24) BC - SCREW PFH 8x3/4 - H100070
Parts needed:
• (4) L5 - BAY WINDOW LEDGE - W101794
• (4) N12 - BAY WINDOW TRIM OUTER - W101795
• (12) O11 - BAY WINDOW TRIM - W101797
• (8) O6 - BAY WINDOW TRIM INNER - W101796
• (6) DF - WINDOW FRAME WHITE 343x444.5 - A100013
Step 1: Attach 'N12' Bay Window Trim Outer to the
edge of 'L5' Bay Window Ledges using screws 'BN'.
Attach 'O11' Bay Window Trims to the edge of 'L5' Bay
Window Ledges using screws 'BQ'. Attach 'O6' Bay
Window Trim Inner to the edge of 'L5' Bay Window
Ledges using screws 'BQ', as shown.
Step 4: Pre-drill & attach 'DF' Window
Frame White to 'N12' & 'O6' Bay Window
Trim boards with screws 'BC', as shown.
L5
L5
BN
BQ
O11
O6
BN
BQ
O11
L5
L5
BQ
BN
N12
O11
O6
O11
BQ
BN
L5
L5
O11
O6
O6
O11
BQ
BQ
BQ
BQ
DF
DF
DF
BC
BC
BC
O6
O6
BC
BC
BC
BC
BC
N12
BQ
BQ
Note: It is vital that the fort
be level before and after
each phase of assembly.
Step 2: Attach 'N12' Bay Window Trim Outer to the
edge of 'L5' Bay Window Ledges using screws 'BN'.
Attach 'O11' Bay Window Trims to the edge of 'L5' Bay
Window Ledges using screws 'BQ'. Attach 'O6' Bay
Window Trim Inner to the edge of 'L5' Bay Window
Ledges using screws 'BQ', as shown.
Step 3: Attach 'O11' Bay Window Trims to the edge of
'L5' Bay Window Ledges using screws 'BQ'. Attach 'O6'
Bay Window Trim Inner to the edge of 'L5' Bay Window
Ledges using screws 'BQ', as shown.
To prevent board splitting, you
must pre-drill each board with
a 1/8" drill bit, before attaching.
Leave 1/8" gap between
window frames for pinch
point.
N12
N12
