![background image](http://html2.mh-extra.com/html/backyard-creations/st-croix-hd-wt17yl/st-croix-hd-wt17yl_assembly-instructions-manual_3053157011.webp)
11
BATTERIES
Make sure the control knob is in the "OFF" position. Unscrew the push
button cap on the ignition module located on the control panel to
access the battery compartment. The ignition module requires one
Alkaline AA size battery (1.5V). The negative (-) end goes in first. See
Figure 11. Dispose of the battery safely as it may explode or leak if
charged or disposed of in a fire. Make sure of the polarity. Mercury
and cadmium free.
CAUTIONS: BATTERY INSTRUCTIONS
●
Always purchase the correct size and grade of battery most suitable for the intended use.
●
Always replace the whole set of batteries at one time, taking care not to mix old and new ones, or batteries of different types.
●
Clean the battery contacts and also those of the device prior to battery installation.
●
Ensure the batteries are installed correctly with regard to polarity (+ and -).
●
Remove batteries from equipment which is not to be used for an extended period of time.
●
Remove used batteries promptly.
For recycling and disposal of batteries to protect the environment, please check the internet or your local phone directory for
local recycling centers and / or follow local government regulations.
LIGHTING INSTRUCTIONS
Warning: If these instructions are not followed exactly, a fire or explosion may result causing
property damage, personal injury, or loss of life.
1. Read instructions before lighting.
2. Push and turn the knob to ON.
3. Hold ignitor to light the burner, release control knob after 15 seconds; if burner does not
light , wait 5 minutes ,repeat.
4. Adjust flame to desired flame with the control knob. See Figure 12.
IGNITER BUTTON
CONTROL KNOB
Figure 12
Figure 11