D-BA-0000307.7.7
Operating instructions
Operation and service
V05 / September 07, 2010
OI-31
6 Operation and service
6.1 BIOS settings
NOTICE
Incorrect BIOS settings
Device malfunctions
•
Only make changes to settings if you know the result of doing such.
•
Check the LCD display to be used before entering the setup settings.
•
Before connecting the new visualization hardware make sure that the
corresponding resolution has been set.
6.1.1 Default settings
All required settings for the device (factory settings) are stored in the default
settings. A change of this configuration by the customer is not needed. The BIOS
settings can only be accessed during the boot-up process.
Load default settings
Procedure:
1. Boot up the device.
2. Press key [Del] during the boot-up process.
3. Press key [L].
The
Defaults Sets
dialog opens.
4. Press ky [Enter].
Default settings will be accepted.
5. Press key [X].
BIOS will be saved and exited.