|
Default = 8
Range 0 - 63
û
to cancel
|
sets the delay before the move within a with the joystick
EDIT JOYSTICK MENU REPEAT
SET JOYSTICK MENU REPEAT Enter value
ü
to accept
|
Default = 63
Range 0 - 63
û
to cancel
|
sets the speed of the movement within a menu with the joystick
EDIT BACKLIGHT BRIGHTNESS
SET BACKLIGHT BRIGHTNESS Enter value
ü
to accept
|
Default = 6
Range 0 - 8
û
to cancel
|
EDIT BACKLIGHT DURATION
SET BACKLIGHT DURATION Enter value
ü
to accept
|
Default = 60
Range 0 - 255
û
to cancel
|
EDIT STOPMODE
SET STOPMODE SCROLL: POWER OFF / ESTOP LOCOMOTIVE
ü
to accept
|
Sets action on use of STOP button Default = Power off
û
to cancel
|
EDIT SRV TRK PROG
SET SRV TRK PROG
SCROLL: CV Powerdown
|
Select Service Track programming methods to use
Various combinations of Register Mode, CV Mode, Paged mode
with or without powerdown
ü
to accept
|
Default = CV Powerdown
û
to cancel
|
EDIT TRK TIMEOUT
SET TRK TIMEOUT SCROLL: No timeout / 7.5 sec / 15 sec / 30 sec
Sets time without handset / basestation connection before power off
ü
to accept
|
Default = 30 sec
û
to cancel
|
FACTORY RESET
ARE YOU SURE ?
ü
to accept
Reset the default values
û
to cancel
USB settings - baud rate
If required the USB baud rate can be slowed to 9600 with a jumper in
RailCom settings
baud rate set to 9600
RailCom off
Selecting track voltage via control on power supply
N
14V
HO / OO 16V to 18V
O
18V
G
21V
RailCom address
Please refer to the full DCC instructions available at www.bachmann.co.uk
