Making connections to the Dynamis
1 Power in
use only the power supply supplied with your Dynamis Ultima
2 Programming track
connect to a length of track for service track programming using the red lead
3 Main track
connect wires to the main running tracks of the layout using the green block
4 ECoSlink
connect to an ECoS controller with appropriate lead
5 Booster
connect a standalone DCC booster using “CDE” connections using 3 pin mini
DIN lead (please refer to booster instructions)
6 USB
connect to a PC using a USB lead
1 2 3 4 5 6
How to select a locomotive to run
Press the locos key, enter the address of the locomotive you wish to run
with the numeric keypad and press [tick]
SELECT LOC
ADDRESS 0
Ÿ
If the address is in the roster, the stored details are displayed
Ÿ
If the address is not in the roster, a roster entry is created with
default settings that can be configured to use requirements.
The maximum number of roster entries is 40
Ÿ
Or Scroll though the roster by pushing the joystick from side to side
Ÿ
Once one loco is running, another can be selected and they can be
moved between with the side to side movement of the joystick
C
D
E
Booster pins seen
from rear of plug
With insulated railjoiners programming track can be a part of the layout
Connecting to the track - ensure that O and B from both
outputs are connected to the same rail
ALWAYS ENSURE THAT THE STOP INDICATOR IS NOT SHOWING ON THE
HANDSET - PRESS THE STOP KEY TO CLEAR IT FOR RUNNING
O
B